FXD-30MW Computerized Metallographic Microscope
Introduction
The FXD-30MW computerized metallurgical microscope is a trinocular
inverted metallurgical microscope, which can provide superior image
quality and a stable and reliable mechanical structure. The machine is
easy to operate, complete with accessories, and is widely used in
metallographic analysis of teaching and scientific research and material
testing in factory laboratories
Observation tube
Hinged trinocular, adjustable diopter, 45°
inclination, can be used for photography, capture
and save observation images, and configure
computer and professional metallographic
analysis software to realize image analysis.
Focusing mechanism
Low-hand position coarse and fine adjustment coaxial
focusing mechanism, with elastic adjustment device and
fast focus random limit device, coarse adjustment stroke
per revolution: 38mm, fine adjustment accuracy: 0.002mm
Stage
The coaxial low-hand position adjustment
moving ruler and the stage extension board
can be installed to expand the application
space and meet the needs of customers with
different requirements
FMIA2021 new version of metallographic image analysis software
Introduction
The FMIA2021 version of the
metallographic image analysis software
system is our company combines the
current metallographic testing needs of
foundry companies, auto parts
companies, heat treatment companies,
bearing steel industry, power system
industry, railway accessories industry, and related testing companies to improve
products. The qualification rate helps to improve the inspection level of various
laboratories. We collect the needs and opinions of experts and teachers from
various industries to develop this set of FMIA2020 version of the metallographic
image analysis software system.
The software system national standard library contains 150 categories and about
700 commonly used sub-modules, which basically cover the commonly used
metallographic standards and meet the requirements of metallographic analysis
and inspection of most units. According to the needs of different industries, open
relevant categories are designated to meet industry testing requirements. All
modules are called for free for life, and standards are upgraded for free for life.
In view of the continuous increase of new materials and imported materials, the
materials and evaluation standards that have not yet been entered in the software
can be customized and entered.
Features:
Software installation is more intuitive and concise
The brand-new software installation, registration, calibration guide mode is simple
and clear, and can be completed by default prompts.
Genuine Software Assurance System
After the software installation is completed, the original software activation is
performed first, and then the computer hardware ID registration is performed to
ensure the customer's legitimate rights and interests.
Demand standards can be customized
In addition to the standard testing modules, special testing modules can be
customized according to customer needs, such as: corporate standards, special
industry standards, etc.
Quick access to 7 inspection categories
Quick access to 7 categories of statistical production: grain size, non-metallic
inclusions, steel microstructure, decarburized layer analysis, gray iron, ductile iron,
carbon steel spheroidization, etc., plus a metallographic teaching.
The report template can be modified
Report templates can be customized for different companies.
Genuine software can be upgraded
According to the implementation time of the National Standardization Committee
standard, the software will be upgraded for free.
Widely applicable computer systems
This software can be installed and run under Windows 7, Windows 10.
The latest metallographic software standard
GB/T 6394-2017 Grain size measurement rating (grain boundary extraction, grain boundary
reconstruction, single phase, dual phase, grain size measurement, rating)
GB/T 10561-2005/ISO 4967:1998 Determination of the content of non-metallic inclusions in steel
GB/T 7216-2009 gray cast iron: graphite distribution shape, graphite length, number of pearlite,
number of carbides, etc.
GB/T 9441-2009 ductile iron: spheroidization rate, graphite size, quantity of pearlite, quantity of
carbides, etc.
GB/T 26656-2011 vermicular graphite cast iron: graphite morphology, vermicularization rate,
pearlite quantity, phosphorus eutectic quantity, carbide quantity, etc.
GB/T 18254-2016 High carbon chromium bearing steel metallographic inspection
GB/T 34891-2017 Rolling bearing_High carbon chromium bearing steel parts heat treatment
technical conditions
GB/T 1499.2-2018 Steel for reinforced concrete Part 2: Hot-rolled ribbed steel bars
GB/T 1299-2014 Tool and Die Steel
GB/T 3246.1-2012 Microstructure inspection method for deformed aluminum and aluminum
alloy products_Part 1_Microstructure inspection method
GB/T 13925-2010 cast high manganese steel: undissolved carbide grade, precipitated carbide
grade, superheated carbide grade
JB/T 7946-2017 Cast aluminum alloy metallography
JB/T 1255-2014 Rolling bearing_High carbon chromium bearing steel parts heat treatment
technical conditions
JB/T 9986-2013 Tool heat treatment metallographic inspection
QC/T 262-1999 Metallographic inspection of carburized gears: martensite needle length, carbide,
austenite rating, austenite content
QC/T 502-1999 Metallographic inspection of automotive induction hardened parts
QC/T 553-2008 Metallographic Inspection of Cast Aluminum Pistons for Automobile Engines
TB/T2942.2-2018 Steel Castings for Locomotives and Rolling Stock Part 2: Metallographic
Inspection Atlas.
TB/T 2478-1993 Bullet Bar Metallographic Organization Rating Chart
TB/T 2451-1993 Metallographic examination of non-metallic inclusions in cast steel
TB/T 2944-1999 Carbon steel forgings for railway
DL/T 773-2016 12Cr1MoV steel spheroidization rating standard for thermal power
plants_Spheroidized structure characteristics of ferrite and pearlite
DL/T 773-2016 12Cr1MoV steel spheroidization rating standard for thermal power plants _ Ferrite
plus bainite or bainite spheroidization structure characteristics
DL/T 1422-2015 18Cr-8Ni series austenitic stainless steel boiler tube microstructure aging rating
standard
ISO 4499-2016 Cemented Carbide-Metallographic Determination of Microstructure
ASTM A262-2015 Austenitic Stainless Steel Intergranular Corrosion Sensitivity Test Procedure
ASTM E45-2013 Evaluation Method of Inclusion Content in Steel
The national standard library contains about 700 commonly used sub-modules in 150 categories,
which basically covers commonly used metallographic standards and meets the requirements of
metallographic analysis and inspection of most units; the software randomly issues about 120
commonly used sub-modules, and the others are all Free upgrade calls for life.
Basic Function:
1. Organizational analysis
Correctly select the implementation standard of the material, use the
camera system of the metallographic microscope to capture and
photograph the metallographic structure of the sample, and enter the
rating level interface:
(1) Automatic rating: If there are quantitative standards in the
metallographic standard (such as calculation formula, percentage range,
etc.), the software will automatically rate, give the metallographic level,
and generate the metallographic inspection report.
(2) Comparative rating: The software can also compare the sample map
with the map in the gallery, and determine the level manually.
(3) Multi-module rating: multiple modules can be counted at the same
time
2. Image measurement
The software provides a variety of measurement tools such as distance,
rectangle, circle, polygon, polyline length, angle, straight line angle,
radian, point to circle center measurement, etc., to meet the user's basic
geometric measurement functions and obtain relevant measurement
data.
(1) Data export: The data after measurement can generate a special
measurement report with pictures and texts, or it can be directly
imported into EXCEL.
(2) Save the image: the data after measurement can be automatically
integrated with the picture, and the accuracy of the measurement part
can be displayed intuitively.
3. National Standard Gallery
The soft ware provides the function of viewing the gallery and provides users with
the latest national standard-level gallery.
4. Fixed multiple printing
FMIA2021 version of metallographic analysis software system
composition:
1. Software
program
FMIA2021 (U disk);
2. Dongle: USB type + dynamic code verification;
3. Text information: "Instruction Manual" (on the U disk);
4. 0.01mm micrometer scale.
FXD-30MW computerized metallurgical microscope size drawing:
Audited Supplier 
){kind=link}
){kind=link}