50kN Auto Software Controlled Tensile Strength Tester

Product Description

WDW-100 100KN
Electronic Tensile Test Equipment With Stable Reliable Performance

 1 Application
This testing machines is equipped with computer, printer, and general test software, to give an accurate determination of metal the material tensile strength, yield strength, the provisions of non-proportional extension strength, elongation, elastic modulus mechanical properties. Test results can print (force - displacement, force - deformation, stress - displacement, stress - deformation, force - time distortion - time) six kinds of curves and related test data, with the software self-test function that can self-diagnose problems. It is ideal testing equipment for the industrial and mining enterprises, scientific research units, universities, engineering quality supervision station. They are perfect testing instrument project quality testing section, universities and colleges, research institution and industrial and mining. 
2. Test capability of machine and relevant Standard:
ASTM E8 - 16 Standard Test Methods for Tension Testing of Metallic Materials
ISO 6892-1 Materials --tensile testing
ASTM A370-05 Standard Test Methods and Definitions for Mechanical Testing of steel products
3. Main Technical Parameters:

Model	ETM-100
Max. load force	100KN
Machine appearance size	880×600×1900(mm)
Effective tensile space	0-650mm (Customized )
Effective Test width	450mm
Total Machine Height	1900 mm (Customized )
Crossbeam travel speed	0.001-500mm/min
Power Supply	220V 1Phase 50Hz  or customized accordingly

 

Testing Specification	ETM-100
Max.load	100KN
Load accuracy	class 0.5
Load range	1%-100%FS  (0.4%-100%FS optional)
Load resolution	1/500000
Deformation Measurement Range	0.2%~100%FS
Deformation accuracy	≤±1%  (≤±0.5% optional)
Deformation resolution	1/300000
Load control speed	0.01~50 kN/s
Deformation control speed	0.002~0.5mm/s

 

Control Specification	ETM-100
Stress rate	0.005%~5%FS/s
Stress rate accuracy range	When rate < 0.05% FS/s, the precision± 2% When rate ≥ 0.005%FS/s, the precision ±0.5%
Deformation rate	0.005%~5%FS/s
Deformation rate accuracy range	When rate < 0.05% FS/s, the precision± 1% When rate ≥ 0.005%FS/s, the precision ±0.5%
Displacement control accuracy	±0.5%
Constant load, deformation and displacement control	0.5%~100%FS
Constant load, deformation and displacement control accuracy	Preset value≥10%FN, within the ±0.1% of preset value; Preset value<10%FN, within the ±1% of preset value

 

Clamping Specifications	ETM-100
Round specimen clamping range	Φ4-9mm,9-14, (14-20mm optional)
Flat specimen clamping range	0-7mm, 7-14, (14-20mm optional)
Tensile grip	Manual Wedge Fixture
Compression Plate	Φ100x100 mm, round plate
Electronic Extensometer for metal material	YUU10/50 (optional)

4. Main Unit Feature:
4.1 Rigid floor-standing frame loading structure with upper space for tensile and lower one for compression and bending test
4.2 Precise ball screws withstand the whole loading with long-life use and compact layout.
4.3 Speed control system is set under the table and comprises the synchronous toothed belt and pulley for high-efficient transmission, which are featured with low noise and maintenance free.
4.4 Fixed crossbeam as upper ones, and sits above the frame and with middle crossbeam as loading beam with smooth travel when testing . The high-accuracy sensor is installed below the crossbeam.
4.5 Load automatic withstanding,, stress, strain control, cycle control and self programming.
4.6 High precision load sensor for guarantee accurate and stable measure
4.7 Wide crossbeam travel speed from 0.05 ~ 500mm / min
4.8 Overload protection: as test force exceeds 2%-5% of the maximum test force of each file, overload protection, it will stop. 

1. Components Supply list

Item	Main body	Material
1	Upper beam	1set
2	Cross beam	1 set
3	High precision ball screw	2 sets
5	Servo motor	Japan Panasonic Brand
6	Load sensor	America Transcell Brand
7	Reducers	Taiwan Brand
8	Synchronous belt	China Brand 1PC
9	Computer	Lenovo, 1PC with LCD screen and all new
10	Printer	HPA4 color ink-jet printer, 1PC

Item	Clamping	QTY
1	Manual Wedge Tensile fixture	1 set
2	Round Jaws: 4-9mm, 9-14 , (14-21mm optional) Flat Jaws: 0-7mm, 7-14, (14-21mm optional)	2 sets & 2 set
3	Bending Test Fixture	1set
4	Compression Plate	1 set