LCD Display M16 M20 M22 M24 M27 M30 High Strength 20-500kn Bolts&Nuts Tester Torque Twist Force Testing Machinery 10-2000n. M

• Customization: Available
• After-sales Service: Whole Life
• Warranty: Whole Life
• Max Diameter of Workpiece: <500mm
• Mass Scope of Workpiece: 2000kg
• Type: Strength Testing Machine
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Load Way: Electronic Load
• Loading Method: Static Load
• Display: Digital
• Control: Manual Control
• Weight: 500-1000Kg
• Power Source: AC220V
• Oil Cylinder Position: Top
• Voltage: AC220/Loading System: 380V 50Hz
• Axial Force Detection Range: 20-500kn
• Torque Detection Range: 10-2000nm
• Relative Resolution: ±0.5%
• Test Machine Axial Force Repeatability: ≤1%
• Bolts Nuts: M16/20/22/24/27/30
• Bolt Length Range: 50-260mm
• Platform Spindle Center Height: ≧100mm
• Twist Direction: Forward Reverse
• Display Method: LCD Display
• Torsion Shear Wrench (Optional for M16-3: 1 Set
• Torsion Wrench Socket (Optional for M16-: 1 Set
• Transport Package: Plywood Case
• Specification: 1600X600X1200
• Trademark: Chenji or OEM ODM
• Origin: Jinan or Others

Product Description

LCD Display M16 M20 M22 M24 M27 M30 High Strength 20-500kN Bolts&Nuts Tester Torque Twist Force Testing Machinery 10-2000N.m
Usage      
 The high-strength bolt detector (JW-500DP) is designed and manufactured in accordance with the relevant requirements of GB50205-2020 "Code for Acceptance of Steel Structure Engineering". Bolts for re-inspection shall be randomly selected from the bolt batches to be installed at the construction site, and 8 sets of connection pairs shall be selected for re-inspection in each batch. The measuring instruments used for the retest of the torque coefficient of the connection pair shall be calibrated before the test, and the error shall not exceed 2%. Each connection pair should only be tested once, and should not be reused. When the washer rotates during tightening, the connection pair should be replaced and the test should be repeated. The retest of the torque coefficient of the connection pair should insert the bolt into the high-strength bolt tester. While measuring the bolt pretension P, the torque value T on the applied working nut should be measured, and the torque coefficient K should be calculated.
When carrying out the torque coefficient test of the connection pair, the bolt pretension value should meet the requirements of Table B.0.4.
Chart B.0.4 Bolt pretension value range(kN)

Bolt Specification (m m)		M16	M20	M22	M24	M27	M30
Pre- tension value P	10.9s	93-113	142-177	175-215	206-250	265-324	325-390
	8.8s	62-78	100-120	125-150	140-170	185-225	230-275

This model is computer controlled with English Software Operating. 

The automatic high-strength bolt detector (JW-500DP D) can detect, display and print the axial force, torque, and torque coefficient of the large hexagon head high-strength bolt connection pair (M16, M20, M22, M24, M27, M30). When the axial force reaches the value specified in the standard, the tester will beep and record the test data. After the device stays for 1 second, it will automatically reverse to loosen the sample. At the same time, the tester will automatically calculate the torque coefficient based on the detected axial force and torque. And automatically display; when a set of tests are completed, the detector automatically calculates the average axial force, average torque, average torque coefficient, standard deviation, and coefficient of variation of N test pieces; the control system can cycle through 1000 sets of data Update storage and can read and print at any time.
 
In addition, the pretension of the torsion shear type bolt connection pair (M16, M20, M22, M24, M27, M30) can also be tested (optional). When the torx head is twisted, the pretension of the bolt can be recorded and used as a set of tests. After finishing, the tester automatically calculates the average pretension, standard deviation and coefficient of variation of N test pieces. The horizontal structure microcomputer-controlled high-strength bolt detector is equipped with torsion shear wrenches to realize the torsion shear function. The specifications include M16-30 six specifications of wrenches and corresponding sleeves. During the test, it is no longer loaded by the host motor, but passed Wrench loading, the equipment collects the pre-tension from time to time, records and analyzes the test results, after processing, the test results can be displayed and printed directly.

Testing Principle
The detection of steel structure large hexagon bolts is to connect two sensors through the controller to collect the axial force and torque of the sample. The two sensors bear the combined force of the sensors through the combination of mechanical structure to ensure simultaneous loading and unloading at the same time. When the set standard pre-tension value is reached, the torque coefficient under the corresponding torque is recorded and calculated; the detection of torsion shear type high-strength bolts is also connected to the axial force sensor through the controller, and the axial force of the sample is collected. When the plum blossom head is twisted When, record the tightening axial force.


8 Samples can be tested 

Features:
1. The height of the main machine adopts the principle of man-machine design, and the touch operation is convenient. It adopts horizontal structure, thickened steel plate, fine grinding table, and ribbed support to ensure the rigidity of the whole machine. The motor, reducer, coupling, torsion sensor, axial tension device, etc. are on a central axis to ensure Sufficient coaxial accuracy to complete the bolt test.
2. The bolt installation test module is positioned on the linear guide rail, and the test piece is easy to install and adjust.
3. Humanized program design, one-click completion of the test process.
4. The input end uses a reducer to load at a uniform speed to ensure the uniformity, stability and speed accuracy of the transmission, and improve the authenticity of the test results.
5. The electric wrench is omitted, the test operation is convenient, and the work efficiency is high
6. The machine has the functions of parameter backup and recovery, automatic calibration, and sensor overload protection prompts.

Standard
GB50205-2020 "Code for Acceptance of Steel Structure Engineering"
GB/T1231-2006 "Technical conditions for high-strength large hexagon head bolts, large hexagon nuts and washers for steel structures"
GBT 3632-2008 "Twist-shear type high-strength bolt connection pair for steel structure"
Users can also provide related technical standards, such as ISO, ASTM, EN, DIN, JIS, and realize the control of test methods and related data collection and processing according to the standards provided by the user.


Technical Parameter

Model	JW-500DP
Axial force detection range	20-500kN
Torque detection range	10-2000Nm
Torque measurement error:	Better than ±1% of the indicated value
Relative resolution:	±0.5%
Relative indication error of test torque repeatability:	≤1%
Indication error of axial force measurement:	Better than ±1% of the indicated value
Test machine axial force repeatability:	≤1%
Bolt and nut specifications:	M16/20/22/24/27/30
Bolt length range	50-260
voltage:	Control system: AC220/loading system: 380V±10% 50Hz
Platform spindle center height	>=100mm
Twist direction	Forward Reverse
Process control	Program execution is automatically completed
control method	Dedicated system control
Display method	LCD display

Equipment List

Name	Unit	Qty
Host Control Cabinet for Testing	Set	1
Dedicated controller	Set	1
Dedicated measurement and control system (software copyright has been obtained)
Mini printer	Set	1
Controller power cord	PC	1
Control signal line	PC	1
Axial force sensor 500kN (already installed on the device)	PC	1
Axial force sensor signal line	PC	1
Torque sensor 2000 Nm	PC	1
Torque sensor signal line	PC	1
Gravity sleeve 27, 34, 36, 41, 46, 50	PC	Each 1
Bolt outer baffle 16, 20, 22, 24, 27, 30	PC	Each 1
Bolt inner baffle 16, 20, 22, 24, 27, 30	PC	Each 1
Anti-rotation board 16, 20, 22, 24, 27, 30	PC	Each 1
Insert positioning block	PC	1
Brand precision planetary cycloid reducer	Set	1
Taiwan brand high-precision heavy-duty rail	Pair	1
Reducer full-covering protective cover	PC	1
Certificate of conformity	PC	1
Warning stickers	PC	3
user's Guide	PC	1
Packing List	PC	1
Torsion shear wrench (optional for M16-30)	PC	1
Torsion wrench socket (optional for M16-30)	Set	1

Note: Dimension 1600X600X1200,Weight is about 600KG