FCX-40MW computer software auto control metallurgical microscope
Epi-illuminator
Uses a Kola illumination system with field diaphragm, aperture diaphragm, and oblique illumination; preset polarizer, analyzer, and color filter slots.
Single 5W LED warm white lighting (3000-3300K), compared with similar LED lighting, can minimize the visual fatigue of the observer.
The field diaphragm and aperture diaphragm are equipped with pull rods, the center can be adjusted, and the size of the illumination range can be flexibly adjusted, effectively avoiding the influence of stray light on the image.
The polarizer and analyzer can realize simple polarized light observation, and you can also choose different color filters to obtain the ideal observation effect according to your needs.
FCX-40MW computer software auto control metallurgical microscope
FCX-40MW computer metallographic microscope is a trinocular upright metallographic microscope. This machine has excellent imaging performance and comfortable operating experience, providing customers with cost-effective metallographic analysis and industrial inspection solutions.
observation tube
The observation tube with the best comfortable angle (30°) for the newborn bed can relieve the user's tension and fatigue under long-term working conditions and ensure the best observation state. The scale on the observation tube is convenient for users to adjust the optimal interpupillary distance range.
- FCX-40MW Configuration list:
| Configuration list |
Model |
| Items |
Specification |
FCX-40MW |
| Optical system |
Infinity Chromatic Aberration Correction Optical System |
· |
| observation tube |
30° tilt, infinity hinged three-way observation tube, interpupillary distance adjustment: 54mm~75mm, diopter adjustment: ±5 diopters, two-speed splitting ratio R:T=100:0 or 50:50 |
· |
| eyepiece |
High eye point large field plan eyepiece PL10X/22mm |
· |
| High eye point large field plan eyepiece PL10X/22mm (adjustable diopter, with micrometer) |
O |
| High eye point large field plan eyepiece PL15X/16mm |
O |
infinity flat field
Achromatic Objectives |
LMPL 5X /0.15 WD10.8mm |
· |
| LMPL 10X/0.30 WD12.2mm |
· |
| LMPL 20X/0.45 WD4.00mm |
· |
| LMPL 50X/0.55 WD7.9mm |
· |
| LMPL 100X/0.80 WD2.15mm |
O |
| converter |
Internal positioning five-hole converter |
· |
Focusing mechanism
|
Transflective dual-purpose frame, low-hand position coarse and fine coaxial focusing mechanism, coarse adjustment stroke 28mm, fine adjustment accuracy 0.002mm. With adjustable elastic device to prevent sliding and random upper limit device. With platform position up and down adjustment mechanism, the maximum sample height is 28mm, |
O |
| Reflector frame, low hand position coarse and fine coaxial focusing mechanism, coarse adjustment stroke 28mm, fine adjustment accuracy 0.002mm. With adjustable elastic device to prevent sliding and random upper limit device. With platform position up and down adjustment mechanism, the maximum sample height is 78mm, |
· |
Stage
|
Double-layer mechanical mobile platform, coaxial adjustment in X and Y directions of low hand position; platform area 175X145mm, moving range: 76X42mm, can be equipped with transflective glass stage plate |
· |
| Stage plate for reflection |
O |
| upper lighting system |
Adaptive wide voltage 100V-240V_AC50/60Hz, reflector lamp room, single high-power 5WLED, warm color, Kola illumination, with field diaphragm and aperture diaphragm, center adjustable, with oblique lighting device |
· |
| lower lighting system |
Adaptive wide voltage 100V-240V_AC50/60Hz, transmission lamp room, single high-power 5WLED, warm color |
· |
| condenser |
Swing-Out Achromatic Condenser for Transmission (N.A0.9) with Variable Aperture Diaphragm, Center Adjustable |
· |
| color filter |
Yellow, IF550 filter, LBD filter, neutral filter |
O |
| Metallographic Analysis System |
FMIA2021 genuine metallographic analysis software, USB2.0 Sony chip 12 million camera device, 0.5X adapter mirror interface, micrometer. |
· |
| computer |
HP business jet |
O |
Note:"·"is standard configuration list;" O"is spare use
FMIA2021 New version of metallographic image analysis software
Introduction:
FMIA2021 version of the metallographic image analysis software system is our company to combine the current foundry enterprises, auto parts enterprises, heat treatment enterprises, bearing steel industry, power system industry, railway parts industry, and related testing companies for metallographic testing needs, improve product quality The pass rate helps improve the inspection level of each laboratory. We collect the needs and opinions of experts and teachers in various industries to develop this FMIA2020 version of the metallographic image analysis software system.
The national standard library of the software system contains about 700 commonly used sub-modules in 150 categories, which basically cover the commonly used metallographic standards and meet the requirements of metallographic analysis and inspection of most units. Designate open related categories according to different industry needs to meet industry testing requirements. All modules can be called for free for life, and the standard is upgraded for free for life.
In view of the continuous increase of new materials and imported grade materials, materials and evaluation standards that have not been entered in the software can be customized and entered.
- Features:
Software installation is more intuitive and concise
The new software installation, registration, calibration guide mode is simple and clear, and can be completed through the default prompt.
Genuine Software Assurance System
After the software installation is completed, first activate the genuine software, and secondly register the computer hardware ID, so as to ensure the genuine rights and interests of customers.
Demand standard can be customized
In addition to the standard testing modules, special testing modules can be customized according to customer needs, such as: enterprise standards, special industry standards, etc.
7 major inspection categories quick entry
Quick access to 7 major categories of statistical production: grain size, non-metallic inclusions, microstructure of steel, decarburization layer analysis, gray iron, ductile iron, carbon steel spheroidization, etc., plus a metallographic teaching.
Report templates can be modified
Report templates can be tailored for different companies.
Genuine software can be upgraded
According to the standard implementation time of the National Standardization Committee, the software will be upgraded for free.
Wide range of computer systems
This software can be installed and run under Windows 7 and Windows 10.
- The latest metallographic software standards: --- Partial selection
GB/T 6394-2017 Grain size measurement and rating (grain boundary extraction, grain boundary reconstruction, single phase, dual phase, grain size measurement, rating)
GB/T 10561-2005/ISO 4967:1998 Determination of non-metallic inclusion content in steel
GB/T 7216-2009 Gray cast iron: graphite distribution shape, graphite length, pearlite quantity, carbide quantity, etc.
GB/T 9441-2009 Ductile Iron: Nodularity, Graphite Size, Pearlite Quantity, Carbide Quantity, etc.
GB/T 26656-2011 Compacted graphite cast iron: graphite morphology, vermicularization rate, pearlite quantity, phosphorus eutectic quantity, carbide quantity, etc.
GB/T 18254-2016 Metallographic inspection of high carbon chromium bearing steel
GB/T 34891-2017 Rolling bearing_Technical conditions for heat treatment of high carbon chromium bearing steel parts
GB/T 1499.2-2018 Steel for Reinforced Concrete Part 2: Hot Rolled Ribbed Steel Bar
GB/T 1299-2014 Tool and Die Steel
GB/T 3246.1-2012 Microstructure test method for deformed aluminum and aluminum alloy products_Part 1_Microstructure test method
GB/T 13925-2010 Casting high manganese steel: grades of undissolved carbides, grades of precipitated carbides, grades of superheated carbides
JB/T 7946-2017 Metallographic phase of cast aluminum alloy
JB/T 1255-2014 Rolling bearing_Technical conditions for heat treatment of high carbon chromium bearing steel parts
JB/T 9986-2013 Tool heat treatment metallographic inspection
QC/T 262-1999 Metallographic Examination of Automobile Carburized Gears: Martensite Needle Length, Carbide, Austenite Rating, Austenite Content
QC/T 502-1999 Metallographic inspection of automotive induction hardened parts
QC/T 553-2008 Metallographic Inspection of Cast Aluminum Pistons for Automobile Engines
TB/T2942.2-2018 Steel castings for rolling stock Part II: Metallographic structure inspection map.
TB/T 2478-1993 spring bar metallographic structure rating chart
TB/T 2451-1993 Metallographic examination of non-metallic inclusions in cast steel
TB/T 2944-1999 Carbon steel forgings for railway
DL/T 773-2016 12Cr1MoV steel spheroidization rating standard for thermal power plants_Spheroidization characteristics of ferrite and pearlite
DL/T 773-2016 12Cr1MoV steel spheroidization rating standard for thermal power plants_Spheroidization characteristics of ferrite plus bainite or bainite
DL/T 1422-2015 18Cr-8Ni series austenitic stainless steel boiler tube microstructure aging rating standard
ISO 4499-2016 Cemented carbides -- Metallographic determination of microstructure
ASTM A262-2015 Test procedure for susceptibility to intergranular corrosion of austenitic stainless steels
ASTM E45-2013 Method for Assessing Inclusion Content in Steel
The national standard library contains about 700 commonly used sub-modules in 150 categories, basically covering the commonly used metallographic standards and meeting the requirements of most units for metallographic analysis and inspection; the software randomly distributes about 120 commonly used sub-modules, and the others are all Lifetime free upgrade calls.
- Basic Skill:
1. Organizational Analysis
Correctly select the implementation standard of the material, through the camera system of the metallographic microscope, capture and take pictures of the metallographic structure of the sample, and enter the evaluation level interface:
(1) Automatic rating: There are quantitative standards in metallographic standards (such as calculation formulas, percentage ranges, etc.), the software automatically grades, gives metallographic grades, and generates metallographic inspection reports.
(2) Comparison rating: The software can also compare the sample map and the map in the gallery, and manually determine the level.
(3) Multi-module rating: Multiple modules can be counted at the same time
Audited Supplier 
){kind=link}